annke SANNCE N43SU, Quick Start Manual, Page: 19 / 32

14
[Type]: Select the corresponding type (“All”, “Alarm”, “MD”, “Alarm/MD”, “Manual”, “General” ) to backup.
[Channel]: Select the corresponding channel to backup.
[Start Time]: Select time to start backup.
[Start Time]: Select time to end backup.
Click “ OK ” when you get the message of “ Backup finished ”, then you can plug the USB drive out. You need to
install the APP “ Displayer ” in the CD to play the video on the PC.
3.9 Alarm Setting
Go to NVR’s “ Main Menu ”>“ Alarm ” to go to the interface of Alarm setting. Alarm functions include: motion
detect,video blind, video loss, alarm input and alarm output, as shown in the figure below.
3.9.1 Motion Detect
Steps:
1. Go to NVR’s “ Main Menu ”>“ Record ”>“ Record Configuration ” to tick “ Detect ”.
2. Go to NVR’s “ Main Menu ”>“ Alarm ”>“ Motion Detect ” to go to the interface of Motion Detect. Click and
check “ Enable ”, select “ Channel ”, “ Sensitivity ”, “ Period ”, “ Alarm Out ”, “ Record Channel ”, “ Buzzer ”, “ Send
Email
” according to you needs, and then click “
OK
” to save, as shown in the figure below.