annke SANNCE N43SU, Quick Start Manual, Page: 16 / 32

11
4. Check connection status. Click “ Exit ”. Live video appears.
If you find status is connected but there is still no image, please go to NVR’s “
Main Menu
”> “
System
”>
“
General
” to change video standard or reboot NVR to have a try.
3.6 Recording Setting
Steps:
1. Make sure hard disk has been installed in advance, and then go to NVR’s “ Main Menu ”>“ Info ”>“ HDD Info ”
to confirm that the status of hard disk is “Normal”.
2. Go to NVR’s “ Main Menu ”>“ Record ”>“ Record Configuration ” to go to the interface of recording setting.
The system will keep recording all day long when you set the recording time for 24 hours. Select and check
“Regular”(Schedule recording), “Detect”(motion detection recordings),“Alarm”(other alarm recordings like video
loss recordings) and click “ OK ” to save, as shown in the figure below.
[Channel]: Select the corresponding channel number to set the channel.