Page 10 of 44
3 Methods of Safe Installation
Place the appliance on a strong, flat and level surface.
Place your appliance where there is no heat source nearby or direct sunlight.
Splashing water on the appliance may cause a short circuit.
For good ventilation keep enough space between the side walls and your appliance.
Leave at least a 100mm gap between the back and sides of the Appliance and any wall.
Leave ample space above to access the jar lid and steamer.
4 Before First Use
4.1 Unpacking
•
Remove all packaging materials and dispose of properly and thoughtfully.
•
Before using your appliance and accessories, it is strongly advisable to clean them
thoroughly. Refer to “Cleaning” section for instructions.
5 Assembling Components and Use of Accessories
With the Appliance fully unpacked and placed in a suitable position as described previously,
you are now ready to use your appliance.
5.1 Drive Coupling
If not already fitted to the bottom of the jar, the drive coupling and rubber sealing gasket
must be fitted and secured properly.
