Page 11 of 44
To do this, take the drive coupling and ensure the rubber gasket is fitted over the bottom
of the coupling as shown below.
Failure to fit the rubber sealing gasket will allow liquids to escape out the bottom of the
jar.
From the top of the jar, lower the drive coupling down and through the hexagonal hole
in the bottom of the jar.
NOTE: The drive coupling can only be fully inserted into the hexagonal hole in
three positions. Not six positions of the hexagonal hole. So, if the drive coupling
cannot be inserted all the way into the hole, rotate the drive coupling one notch
and push in.
Whilst holding the drive coupling in place, flip the jar upside down.
Take the locking collet with your other hand and with the arrow on the collet aligned with
the Unlocked Padlock symbol on the base of the jar, push the locking collet down, then
with some force, rotate clockwise until the arrow is aligned with the Locked Padlock
symbol to seal and lock the Drive Coupling in place.
5.2 Multifunction Blade
The Multifunction Blade is used primarily for chopping food items.
IMPORTANT:
Take extra care when handling this accessory as the blades are very
sharp and may cause injury if mishandled.
To install the Multifunction Blade, grasp the top of the blade post.
DO NOT grasp or touch the sharp blade edges.
