12.1
Connecting the Coaxial Cable from SPDIF to the CON1
Port
Figure 40 - Digital Board installed in position
With the super regulator board completed and in position, we are going to now position the
Digital Board. This board has been built and tested at the ANK factory and will be located in an
anti-static bag. There are 5 holes that secure the digital board, the hole that is unpainted and
closest to the rear of the chassis will be the first hole to find.
We are actually going to just introduce a couple of connections to the digital board before
positioning in the chassis that we will be installing later.
Connect the Coaxial cable from the SPDIF input to CON1
USB input
XLR input Con1
The board has two channels or inputs: CON1 and CON2. The first channel or CON1 is connected
to the Silver WBT RCA provided.
The second channel is optional – you can connect and XLR input or an SPDIF input or even a
USB
60
Summary of Contents for DAC5.1 Signature
