Animo optibean ng, Service Book

Page: 92 / 110

92
OptiBean NG /OptiBean XL NG
2017/08 Rev. 2.0
10.3 Display messages during use
Display Possible cause Action
Make your choice
Rinsing
Rinse program not activated in
time.
Run the rinse program and follow
the instructions in the display.
See chapter 6. Maintenance / 6.1
daily rinsing program
Make your choice
Cleaning
Cleaning program is not activated
in time.
Run the cleaning program and fol-
low the instructions in the display.
See chapter 6. Maintenance / 6.2
Weekly rinsing program
Make your choice
Service boiler
Boiler needs maintenance.
See chapter 6.3 Periodic maintenance /
6.3.1 service boiler.
Make your choice
Service brewer
Brewer needs maintenance.
See chapter 6.3 Periodic maintenance /
6.3.2 service brewer and 5.4.4 servicing
Out of order
Boiler filling
When used for the first time: boiler
is still empty and is being filled.
No action needed. Follow the instructions
on the display. When the boiler is filled,
‘Boiler heating’ follows.
Out of order
Boiler heating
The boiler temperature is
(temporarily) too low because too
much water has been used.
Once the temperature is restored, the mes-
sage automatically disappears and the drink
selection buttons are reactivated.
If this text remains in view for 6
minutes, an E21 boiler time out
follows.
See E21 boiler timeout.
Out of order
Drip tray full
Drip tray full.
Once the drip tray is emptied, the message
automatically disappears and the drink
selection buttons are reactivated.
Out of order
Waste bin full
The maximum number of coffee
cups that the waste bin can hold
has been reached.
Empty waste bin. The cup counter is
automatically reset when the waste bin is
replaced.
Out of order
Waste bin missing
Waste bin is not detected. Check the waste bin.