Animo optibean ng, Service Book

Page: 59 / 110

59
2017/08 Rev. 2.0
EN
OptiBean NG /OptiBean XL NG
Service menu continued ...
Main item Sub-item Sub Range Description
2.7 Hardware test Inputs Temp Boiler temp °C Shows the status of the sensors/switches
concerned
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15
17 18
1
2
3
4
5
16
Drip tray sensor yes/no
Waste bin yes/no
Door switch 1 (pin) yes/no
key switch yes/no
brewer switch 1 (right) yes/no
brewer switch 2 (left) yes/no
Door switch 2 (lock) yes/no
Key panel
Service panel
Cup sensor left yes-no
Cup sensor middle yes-no
Cup sensor right yes-no
Jumper detection yes-no
Outputs
Test by holding
in recipe button
11.
# During test the
display shows
the Nominal
current (mA).
When the
Nominal
current of a out-
put rises above
the set current *
mentioned output
will be shut off.
KW1
500mA
Inlet valve (Boiler)
DV1 Dispensing valve 1 (Brewer)
DV2 Dispensing valve 2 (Mixer 2)
DV4 Dispensing valve 4 (Hot water)
DV5 Measuring valve 5 (n.a.)
DV6 NO valve
IM1 # - Grinder motor 1
IM3 # 600mA Ingredient motor 3
IM4 # 600mA Ingredient motor 4
BM # 900mA Brewer motor
MM2 # 2000mA Mixer motor 2
Ventilator - Fan
LED’s LED’s
KW2 Pump (via SSR)
KW3 500mA Valve KW3 cold water
Optilight Red, Green, Blue