Anfatec eLockIn 203, Manual

Page: 44 / 58

' LockIn ' menu. Enter parameters/values as described above (no underscores needed
here!).
4.2 U
SE
CGI-F
UNCTIONS VIA
W
EB
B
ROWSER
Web browsers are also able to address the CGI-interface of the
eLockIn
directly. The
commands are based on the structure described in the previous chapter. The only
difference is that the web browser needs the IP-address of the
eLockIn
for every
command.
Example: Set the reference frequency to 100 kHz using the remote.cgi with the
following parameter set:
http://192.168.1.7/cgi-bin/remote.cgi?8DD_100000_8
After '?', '8DD' indicates that the 'LockIn', the 'Ref' and the 'f [kHz]' menus are entered
one after the other. The underscore is the spacer for the frequency value '100000'. With
the '8' command, the
eLockIn
is turned back to the 'LockIn' main menu.
4.3 E
XPORTED FUNCTIONS OF THE E
L
OCKIN
.
DLL
The functions exported by the dll are described in the following table:
Name Input Output Description
_Init IP-address
type: pChar
No Return
value.
Initializes the
eLockIn
by calling
the current IP address.
IT IS ABSOLUTELY MANDATORY TO CALL THIS _Init-FUNCTION AS VERY FIRST
FUNCTION BEFORE ALL OTHER FUNCTIONS CAN BE USED!!
_GetLockInData
Channel
[1 to 4]
type:
Integer
Value
[real
number]
type: double
Returns the measured Value of the
Channel as real number.
***
_SetLockInInpRange Range
type:
double
No Return
value. Switches the input range between
low noise (1), normal (10) and high
dynamic reserve (100) (see table 2
page 36).
_SetLockInCouple Couple
type:
double
No Return
value. Switches the input coupling between
dc (0) and ac (1). (table 3, page 36)
_SetLockInFilterTime Time
constant
type:
double
No Return
value. Switches the time constant of the
filter. The values are coded as in
table 7 on page 37
_SetLockInSyncFilter
(Vers. > 1.0.0.2) Number of
cycles:
double
No Return
value. Switches the number of cycles for
the sync filter. Values from 0 (Off) to
255
44 (58)