Anfatec eLockIn 203, Manual

Page: 35 / 58

Key (char) ASCII Code Action
8 56 Enter LockIn menu
C 67 Enter Spectra menu
4 52 Enter Scope menu
F 70 Enter Measure menu
0 48 Enter Setup menu
9 57
D 68
5 53
1 49
These buttons invoke the action
displayed next to them on the
screen, depending on the current
position in the menu tree.
7 55 Go back in menu
B 66 Up
E 69 Down
6 54 Left
2 50 Right
+ 43 Knob Right
- 45 Knob Left
S 83 Save screenshot
Table 1: Command keys
Specific values can be adjusted either by using buttons or by sending numbers to the
eLockIn
. The device accepts numbers wherever the software expects user input. Just
like the other commands, numbers need to be passed to '/cgi-bin/remote.cgi', but have
to be enclosed by '_' (underscore).
http://192.168.1.7/cgi-bin/remote.cgi?8DD_100000_8
or
GET
192.168.1.7/cgi-bin/remote.cgi?8DD_100000_8
The command sequence shown above tells the
eLockIn
to
switch to 'LockIn' menu ('8')
enter 'Ref' submenu ('D')
adjust frequency ('D')
set frequency to 100 kHz ('_100000_') !! the second “_” is required even if there is
no further menu entry.
return to 'LockIn' main menu ('8')
35 (58)