ANEP BOX-C
Version #1
09/22/2014
2
SUMMARY
TECHNICAL CHARACTERISTICS
PAGE 4
1.1 - Technical characteristics
1.2 - Factory settings
1.3 - Connecting ANEP BOX-C module
RECOMMANDATIONS
PAGE 6
PROGRAMMING MODE
PAGE 7
3.1 - Enter programming mode
3.1.1 - Exit programming mode
3.1.2 - Addressing
3.1.3 - Simplified programming
3.2 - GSM Mode
3.3 - Programming numbers
3.3.1 - Programming memories 101/102/103
3.3.2 - Programming a pause
3.3.3 - Erase a number
3.4 - Memory attribution
3.4.1 - Transfer method
3.4.2 - Programming table for a single call
3.5 - Enabling and adjustment of parameters
3.5.1 - Conversation timeout
3.5.2 - Listen to call identification
3.5.3 - Cyclic test / periodicity
3.5.4 - Listen data transfer
3.5.5 - Changing the access code programming
3.5.6 - Gain setting in intercom machinery and firefighter modes
3.5.7
- Configuration of the dual call mode
3.6 - Selection of communication protocol
3.6.1 - ANEP protocol
3.6.2 - P100 protocol
3.7 - Adjusting the level of emissions of DTMF codes
CONNECTING THE FLOOD SENSOR
(OPTION)
PAGE 15
4.1 - Flood sensor input
4.2 - Flood sensor installation
4.3 - Detection timeout
1
2
3
4
