ANEP BOX-C, Manual

Page: 19 / 24

ANEP BOX-C Version #1 09/22//2014
19
KEYPAD PROGRAMMING
Programming parameters
Enter & exit programming mode
* + <Access code > Enter programming mode
* Exit programming mode
#0... Programming of parameters
#001# Erasing parameters and phone numbers
#002...# New acces code
#1... Telephone numbers.
#101...# Main telephone number for Emergency elevator telephone calls
#102...# Secondary telephone number for Emergency elevator telephone calls
#103...# Third telephone number for Emergency elevator telephone calls
#104...# Call center telephone number to transfer data after voice
#105...# Telephone number for periodic calls
#106...# Telephone number for internet server
#2... Communication
#200...# Selection of communication protocol
#201...# Voice call timeout (1 to 99 minutes)
#202# Call acknowledge by operator function enabled
#203# Call acknowledge by operator function disabled
#206# Dual calling mode (call to a caretaker) enabled
#207# Dual calling mode (call to a caretaker) disabled
#3... Configuration
#301...# Test call period (1,2 or 3 days)
#302...# Alarm button recognition time (10 to 64 in 1/10 s)
#303...# Module address (1 to 8)
#4... Configuration
#403# Line voltage low ( > = 20V)
#404# Line voltage normal ( > = 28V)
#405# GSM enabled
#406# Analog phone line mode enabled
#407...# Microphone volume adjustment (De 1 à 15).
#408...# Loudspeaker volume adjustement (De 1 à 15).
#409...# Adjusting the level of emissions of DTMF codes
7