ANEP BOX-C
Version #1
09/22//2014
11
3.3.3 - Erase a number
Enter the sequence : «
#
» then, the memory number, then «
#
»
Example : Erase the number and memory
101
# 101 #
Nota :
If no key is pressed for over 20 seconds, the unit plays a «
BEEP
» and returns to the
start of the memory selection part of the programming mode.
3.4 - Memory attribution
3.4.1 - Transfer method
The BOX-C may be programmed to interface with the call center, utilizing the available software and
specifications.
To communicate with call centers, ANEP unit can transfer its ID information and establish a two-way
voice communication either :
•
In a single calls,
•
or two seperate call.
The recommanded method (with respect to European specifications), is to make a single call
(the delay time is optimized.
3.4.2 - Programming table for a single call.
Telephone N°
Type of data
Type of communication
Call center
Memory # 101
Passenger and tech alarm
Data & audio
Main call center
Memory # 102
Passenger and tech alarm
Data & audio
Backup call center
Memory # 103
Passenger and tech alarm
Data & audio
Backup call center
Memory # 104
Remote end of alarm
Data
Main call center
Memory # 105
Periodic call
Data
Call center for periodics calls
Memory # 106
Alarm data
Data
ANEPanywhere or client call center
