AIRSLIM [L]
16
5.5
Motor Assemby
CAUTION!
Ensure that the cables which pass through the top of the motor are on the same side as the rectangular
window of the extension rod.
Failure to do so may result in equipment damage.
Do not lift the motor weight alone.
Failure to do so may result in serious injury or equipment damage.
Ensure that the M10 motor/extension screws are correctly fastened.
Failure to do so may result in
equipment damage.
The motor is fixed to the extension rod by the Screws M10x70mm provided by applying a tightening torque of
60Nm. The cables coming out of the motor must be on the same side as the rectangular window of the extension
rod. The safety cable must pass through the motor through the center.
Due to the weight of the motor, it is recommended that it be raised by two people to avoid personal injury and
damage to the fan.
Part list:
1. M10mm Locked nut 2x)
2. M10 Spring washer (4x)
3. M10*70mm Bolt (2x)
4. Safety cable
5. Motor
Tools:
14mm Wrench
14mm Socket
Torque Wrench
Torque = 60 NM
Keep all electrical
cables on same
side as bolts
