AIRSLIM [L]
13
CAUTION!
Ensure that the M12 bolts are properly tightened.
Failure to do so may result in equipment damage.
5.4
Extension Rod Assembly
CAUTION!
Ensure that power cables, control cables and safety cable pass through the ceiling bracket and through
the extension rod.
Otherwise, the fan will be installed incorrectly.
Ensure to place the rectangular hole of the extension bar on the bottom.
Otherwise, the fan will be installed
incorrectly.
The extension rod is assembled to the ceiling fixation by the cardan joint. The cardan joint allows also the fan to
make free oscillation and to find its own level position specially for inclined roofs.
The extension rod is assembled to the ceiling fixation by the Screws M10 x70mm provided by applying a tightening
torque of 60Nm. The extension rod has a rectangular hole in the side. This hole should be in the lower part closest
to the motor.
The following figure shows how to attach the extension rod to the roof anchor.
Push I-Beam clamp inward to center of
mean for max clamping.
