AIRSLIM [L]
22
6
ELECTRICAL INSTALLATION
WARNING!
Follow the instructions and recommendations contained in this section.
Failure to do so may result in
serious injury or death.
The Anemoi AIRSLIM [L] fan motor is controlled by a control plate located above the motor. To ensure the operation
of the fan, the user must connect power and control cables.
Before installing the fan, it is necessary to remove power supply to prevent any accident. Check that power supply
is disconnected before starting the installation.
All cabling must comply with national and local regulations on cable cross-sections and ambient temperature.
Copper (60°C/75°C) conductors are recommended.
Follow any national or local regulation regarding electrical installations.
CAUTION!
Follow national and local electrical regulations.
Failure to do so may result in serious injury or death.
Check that power supply is disconnected before starting the installation.
Failure to do so may result in
serious injury or death.
Do NOT install the fan with wet hands.
Failure to do so may result in serious injury or death.
