AIRSLIM [L]
26
6.4
Multi Fans Installation
In installations with multiple fans, it is possible to control the fans using a single controller. In this case, the controller
is connected to the different by using control connections described in section 6.3.
The connection must be made in series. The last fan of the series, the switch must be configured as ON / OFF /
OFF and in the rest of the fans as OFF / OFF / OFF. The location of switch 1 can be seen in the figure of section
6.1.
The next figure shows the correct connections:
WARNING!
The earth meshes of each cable section must remain together.
Failure to do so may lead to communication
errors.
Connect only one end of the earthing to the ground.
Failure to do so may lead to communication errors.
