andrews SUPAflo EVO SF60 EVO, Installation And Service Manual

Page: 9 / 48

Technical data
9
EN
Measure
unit
SUPAflo EVO
SF64 SF65 SF66 SF67
Nominal heat output at 80/60ºC max/min kW 285,7/56,5 381,3/75,2 476,7/94,6 540,2/120,0
Nominal heat output at 40/30ºC max/min
kW 303,3/64,2 404,3/85,6 505,2/106,9 572,8/135,1
Nominal heat input Hi max/min
kW 291,0/58,2 388,0/77,6 485,0/97,0 550,0/122,2
Efficiency at 80/60ºC % 98,2 98,3 98,3 98,2
Efficiency at 40/30ºC % 104,2 104,2 104,2 104,2
Annual efficiency (NNG 40/30ºC)
% 110,4 110,4 110,4 110,3
Max. condensate flow
l/h 18,5 24,7 30,7 34,8
Gas consumption G20 max/min (10,9 kWh/m3)
m3/h 26,7/5,3 35,6/7,1 44,5/8,9 50,5/11,2
Gas consumption G25 max/min (8,34 kWh/m3)
m3/h 34,9/7,0 46,5/9,3 58,2/11,6 65,9/14,7
Gas consumption G31 max/min (12,8 kWh/kg)
kg/h 22,7/4,5 30,3/6,1 37,9/7,6 43,0/9,5
Gas pressure G20
mbar 20
Gas pressure G25
mbar 25
Gas pressure G31
mbar 30/50
Maximum gas pressure
mbar 50
Max. temperature flue gas
°C 90
Flue gas temperature at 80/60ºC max/min °C 75/58 75/59 75/59 76/58
Flue gas temperature at 40/30ºC max/min °C 55/30 56/30 56/30 56/30
Flue gas quantity max/min H-gas m3/h 377/77 502/102 628/128 712/161
CO2 level G20/G25 max/min
% 10,2/9,4 ±0,2 (Restriction type 570 delta max/min ≥0,8%
CO2 level G31 max/min
% 11,9/10,0 ± 0,2
NOx 80/60ºC max/min
mg/kWh 36/18 34/17 37/18 40/19
CO 80/60ºC max/min
mg/kWh 14/5 14/8 16/5 18/1
Max. permissible flue resistance max/min
Pa 160/10 400/10 300/10 400/10
Water volume
l 60 63 71 77
Water pressure max/min
bar 8/1
Max. water temperature (High limit thermostat)
°C 100
Maximum temperature setpoint
°C 90
Nominal water flow at dT=20K
m3/h 12,2 16,3 20,3 23,1
Hydraulic resistance at nominal water flow kPa 11,9 32,3 34,3 57,1
Electrical connection
V 230/400
Frequency Hz 50
Mains connection fuse
A 16
IP class IP20
Power consumption boiler max/min (excl. pump) W 230/50 504/54 620/64 676/61
Power consumption speed controlled pump (opt)
W 310/12 470/25 590/25 800/38
Weight (empty)
Kg 434 496 540 595
Sound Power Level (LWA)
dB 70,3 77,3 77,3 77,3
Ionisation current average
μA 10,0/4,5
pH value condensate
- 3,2
CE certification code
- CE - 0063CQ3970
Water connections
- DN65PN16
Gas connection
- R1.1/2” R1.1/2” R2" R2"
Flue gas connection (DN)
mm 200 250 250 250
Air intake connection (for room sealed use) (DN)
mm 130 130 150 150
Condensate connection
mm
32