andrews SUPAflo EVO SF60 EVO, Installation And Service Manual

Page: 35 / 48

Operating instructions
35
EN
Overview of main functions
= confirmation
= cancel,
return to main menu
Button
Action Procedure Display / Function
Set room temperature
Zone 1 and zone 2
Actuate wheel left/right
Turn wheel
Confirm with OK button
or wait 5 sec.
or press
Comfort setpoint with blinking temperature
Blinking temperature in 0,5 °C steps from 10 to 30 °C
Comfort setpoint saved
Comfort setpoint cancelled
- after 3 sec. Main menu appears
Set room temperature for
zone 1 or zone 2
Zone 2 independent from
zone 1
Actuate wheel left/right
Confirm with OK button
Actuate wheel left/right
Confirm with OK button
or wait 5 sec.
or press
Choose heating zone
Heating zone is chosen
Blinking temperature in 0,5 °C steps from 10 to 30 °C
Comfort setpoint saved
Comfort setpoint cancelled
- after 3 sec. Main menu appears
Switch on /off DHW
operation
Press button DHW mode on / off
(see indication below DHW symbol)
- On: DHW mode by time programm
- Off: no DHW operation
- Safety functions activated
Auto
F C
i
Change heating operation
mode
Factory setting Automatic mode on, with:
- Heating by time programm
- Temperature setpoint by heating programm
- Safety functions activated
- Summer/Winter automatic switching activated
- ECO-functions activated
(see indication below operation symbol)
Press button 1x Continuous COMFORT heating on, with:
- Heating without time programm by comfort setpoint
- Safety functions activated
Press button 1x again Continuous REDUCED heating on, with:
- Heating without time programm by reduced setpoint
- Safety functions activated
- Summer/Winter automatic switching activated
- ECO-functions activated
Press button 1x again Safety mode on, with:
- Heating off
- Temperature by frost protection
- Safety functions activated
Controller Stop mode Press button > 3 sec.
Press button > 3 sec. again
304: Controller Stop mode
after 3 sec. Main menu appears
Info display Press button 1x
Press button 1x again
Press button 1x again
…..
INFO Segment displayed
- Status Boiler
- Status DHW
- Status zone 1
- Status zone 2
- Time / Date
- Error indication
- Maintenance indication
- room temperature
- room temperature minimum
- room temperature maximum -
outside temperature
- outside temp. minimum
- outside temp. maximum
- DHW temperature 1
- Boiler temperature
- Flow temperature
(Info display depends on configuration)
Back to main menu;
INFO Segment disappears