38
COMMISSIONING
SECTION 4
For your safety read before lighting the appliance
WARNING
1. Always follow manufacturers instructions when lighting the appliance. Failure to
do
so may result in damage to property, personal injury or loss of life.
2. Before lighting check all round the appliance area for gas. Be sure to check at
low level because some gas (i.e. LPG) is heavier than air and will settle on the
floor.
3. Do not make any attempt to re-light the appliance if the main burner has
extinguished. Wait at least 5 minutes to allow for any unburnt gas to disperse.
Ventilate the area if possible.
FOR YOUR SAFETY IF YOU SMELL GAS
1. Turn off gas supply and open windows.
2. Do not operate electrical switches.
3. Extinguish any naked flames.
4. Contact gas supplier if the smell of gas persists.
FOR YOUR SAFETY
Do not store or use petrol, aerosol or other flammable vapours or liquids in the
vicinity
of this or any other atmospheric gas appliance.
WARNING
Hotter water increases the risk of scalding. Before changing the temperature refer
to instruction manual or data label. Hot water can produce third-degree burns in:
6 seconds at 140ºF (60°C)
30 seconds at 130°F (54°C)
USERS
SAFETY
GUIDE
Summary of Contents for 24/39
