Andis CLC-2, Use & Care Instructions Manual

Page: 3 / 13

4 5
OPERATING INSTRUCTIONS
(Refer to Figure A unless noted).
Before starting your clipper, it must be pre-charged fully before using it for the
first time. To start clipper, push the power button; to stop, push the power
button again.
OIL
A
E
C
D
BLADE
LENGTH SETTING BUTTON
FULL BATTERY INDICATOR
LOW BATTERY INDICATOR
RECHARGE BATTERY INDICATOR
AC/DC POWER ADAPTER
SHIFT KEY
POWER BUTTON
ADAPTER
CORD PLUG
B
UNIVERSAL AC/DC POWER ADAPTER
The unit is equipped with a universal AC/DC power adapter.
CHARGING CLIPPER
This battery charger is intended for use with Andis model CLC-2 clipper. Remove
the clipper and AC/DC adapter from the carton. Plug the adapter into a 120V
AC outlet, or according to your local power standards. Confirm the voltage
available at each overseas location before using the appliance. For connection to
a 240V supply, use an attachment plug adapter of the proper configuration for
the power supply receptacle.
The clipper must be OFF for the battery to charge. Plug the adapter cord plug
directly into the bottom of the clipper. The clipper has a lithium-ion battery that
cannot be damaged by overcharging. We recommend that the clipper be
unplugged if not in use for seven or more days.
CLIPPER INDICATOR LIGHTS:
See the chart for charging status and corresponding clipper lights.
FAILURE TO CHARGE:
1. Make sure voltage is present at the wall outlet (confirm with an appliance you
know is working).
2. Check to make sure adapter cord plug is plugged firmly into clipper. If failure
to charge still exists, return clipper to Andis or an Andis authorized service
station for examination and repair or replacement.
CLIPPER INDICATOR LIGHT STATUS
Clipper In Use Indicator Light Status
Full Charge (0-90 minutes of use) Full Battery Indicator BLINKS
Low Charge (90-120 minutes of use)
Full Battery Indicator OFF
Low Battery Indicator ON
Battery Depleted (Over 120 minutes of use) Recharge Battery Indicator ON
Clipper Charging Indicator Light Status
0-10 Minutes of Charging Recharge Battery Indicator BLINKS
10-40 Minutes of Charging
Recharge Battery Indicator ON
Full Battery Indicator BLINKS
40-120 Minutes of Charging
Recharge Battery Indicator ON
Full Battery Indicator ON
Fully Charged
Recharge Battery Indicator OFF
Full Battery Indicator ON