Anderson Group
Log Loader and Forestry Trailer – Operator's Manual
33
1. Disconnect the hydraulic hose from the fitting (A) on the side of the auxiliary valve and
remove the fitting.
2. Remove the plug (B) on the front of the auxiliary valve and place it on the side of the valve,
where the fitting was.
Figure 11 — Fitting and Plug
3. Insert the new NPT plug (45006
3
) into the hole on the front of the valve.
Figure 12 — Installing the New Plug and Fitting
4. Install the fitting (A) on the NPT plug (C).
5. Reconnect the hose to the fitting.
