2
1. INSTALL OUTSIDE AND INSIDE TRIM pLATES:
Insert screw bosses on exterior
trim plate through pre-drilled
holes on exterior of door.
Place interior trim plate against
interior surface of door. Line up
small holes in interior trim plate
with pre-drilled holes on interior
of door.
Insert two (2) #6 x 0.8” screws
through interior trim plate holes
and thread into exterior trim plate
screw bosses. Do not tighten
screws at this time
A.
B.
C.
STEP 1a
#6X0.8” SCrEw
inTEriOr ViEw
SCrEw
BOSS
inTEriOr ViEw
EXTEriOr ViEw
inTEriOr
TriM PLaTE
DOOr
STEP 1B
STEP 1C
EXTEriOr
TriM PLaTE
inTEriOr
TriM PLaTE
DOOr
DOOr
2. SET LATCH BOLT FOR LEFT OR RIGHT HINGED DOOR:
The rounded portion of the latch
bolt needs to be facing the handle
side Z-bar. If latch bolt is in correct
position, proceed to Step 3. Rotate
the latch bolt to correct position for a
left hinge or right hinge door.
Position the lockcase so that the
case is in the up position as shown.
Remove the face plate from the
lockcase by unscrewing face plate
screw.
Rotate the latch bolt to the correct
position for a left hinge or right hinge
door.
Once latch bolt is in correct position,
reattach face plate to lockcase.
A.
B.
C.
D.
rigHT HingE
inSTaLLaTiOn
STEP 2B
FaCE PLaTE
SCrEw
FaCE
PLaTE
LOCkCaSE
uP POSiTiOn
arrOw
STEP 2C
FaCE PLaTE
SCrEw
FaCE
PLaTE
LOCkCaSE
rOTaTE LaTCH
BOLT
LEFT HingE
inSTaLLaTiOn
STEP 2D
TigHTEn FaCE
PLaTE SCrEw
rEaTTaCH
FaCE PLaTE
LOCkCaSE
STEP 2a
TOP ViEw
rigHT HingE inSTaLLaTiOn
LOCkCaSE
FaCE
PLaTE
rOunDED
POrTiOn
OF LaTCH
BOLT
LaTCH BOLT