Safety instructions
8
Edition 02.19
qTOWER
3
84 / qTOWER
3
84 G
2.2
Safety symbols on the qTOWER³ 84
The qTOWER³ 84 is fitted with safety symbols, the content of which must always be
observed. Damaged or missing safety symbols can cause incorrect actions leading to
personal injury or material damage! The safety symbols must not be removed! Dam-
aged safety symbols must be replaced without delay!
The following safety symbols are attached to the qTOWER³ 84 and accessories:
Warning symbol
Mandatory action signs
(on heatable lid)
(on equipment backplate)
Warning against a
hazard location
Warning against
hot surface
Before opening the device al-
ways disconnect the mains plug
The following notice sign is attached to the rear of the qTOWER
3
84:
2.3
Technical condition
The qTOWER³ 84 corresponds in its design and construction to the current state of the
art technology. Unauthorized modifications or changes, especially such that affect the
safety of the staff and the environment, are generally not allowed.
Observe the following:
Any manipulation of the safety equipment is prohibited! In case of an accident
manipulations of the safety equipment will be interpreted as deliberate!
The operator must only operate the device in a sound and operationally safe
condition. The technical condition must always comply with the legal require-
ments and regulations.
Prior to every use the device must be checked for damage and sound condition.
Any changes in the device affecting its safety must be reported by the operating
personnel to the operator without delay.
