Analytik Jena 845-00003-03, User Manual

Page: 49 / 77

2015 37
Routine Start-Up Procedure
6 Routine Start-Up Procedure
6.1 Site Requirements
6.1.1 Installation Requirements
The room which is selected for installation must meet the following environmental
requirements:

Temperature range: +15 °C to 35 °C

Permissible relative air humidity:

85 % at 30 °C, no formation of condensate
The atmosphere inside the operating room should be dust-free to a maximum possible
degree, free from drafts and free from etching vapours. You are prohibited from
smoking in the operating room.
For pipettor site selection, the following rules should be observed:

The operating room must have a stable, horizontal, dry and vibration-free floor.

Do not install the system directly at doors or windows nor close to sources of
electromagnetic interference.

Prevent direct exposure to sunlight and radiation emitted by heaters. Provide air
conditioning for the room if necessary.

Provide easy access to all system parts at all times and do not obstruct ventilation
slots by placing other equipment or fixtures on such inlet/outlet positions.

Allow enough time for the system to adjust to the installation site temperature,
especially where storage and installation are in different locations.
6.1.2 Footprint Requirements
Footprint requirements follow from the dimensional details.
You should also provide adequate space for supplementary units and for the PC, the
monitor and printer.
NOTICE
Failure to observe these installation requirements/rules may impact the correct system
functioning and have a negative influence on precision performance.