Analytik Jena 845-00003-03, User Manual, Page: 61 / 77

2015 49
“What to do if...“
8 “What to do if...“
8.1 Safety Notes
8.2 Description
Check all potential fault sources on occurrence of a fault. If problems are found to persist
after this check or on identification of an undescribed fault, you should notify the
Customer Service of Analytik Jena AG Jena or its authorized service contractor.
8.2.1 Further Errors
NOTE
Refrain from unauthorized repair work, notably, repair work on the product. This may
render potential claims for warranty null and void.
WARNING
Danger as a result of electric voltage!
Observe all safety rules when you inspect cabling for possible faults.
Error/Error code Cause Action for removal
Product does not
work although
connected to line
socket power.
Mains plug was inserted
into the power socket or
the product's combi seal in
a non-conforming manner.
Inspect line power connector
and plug in correctly.
Power socket in
deenergized state
Use other line power socket or
arrange inspection of socket by
an expert.
Power inlet fusing
defective
Detach line power connector
and replace inlet fuse.