NATIX™
Chapter 7 : REMOTE CONTROL PROGRAMMER'S GUIDE (continued)
PAGE 47
7-4. COMMANDS AND RESPONSES TABLE (continued)
VALUE
ASCII
COMMAND
RESPONSE
COMMAND
DESCRIPTION
TYPE
MIN MAX
DESCRIPTION
FRAME & LOGOS COMMANDS
LM LMOD
Frame/logo
mode.
Rd/Wr
0
3
0 = use & assignment mode.
1 = logo recording mode.
2 = frame recording mode.
3 = erasing mode.
LX
LSTA
Status of the logo programmer
Rd
0 4
0 = free.
1 = logo/frame in recalling process.
2 = logo/frame in storing process.
3 = output format incompatible with the logo.
4 = logo/frame in erasing process.
LA
LPGA
Logo 1 & frame assignment.
Rd/Wr
0
10
LB
LPGB
Logo 2 & frame assignment.
Rd/Wr
0
10
0 = none
1 = frame 1
2 = frame 2
3 = logo 1
4 = logo 2................... 10 = logo 8
LC LCUR
•
In logo recording mode: Number of
the logo to be store (3 to 10).
•
In frame recording mode: Number of
the frame to be store (1 or 2).
•
In erase mode: number of the logo to
be erase (0 = erase all).
Rd/Wr
0 10
0 = no logo
1 = frame 1
2 = frame 2
3 = logo 1
4 = logo 2................... 10 = logo 8
LD
LDYS
Display logo (according to PCH)
Rd/Wr
0
1
0 = Display OFF
1 = Display ON
LU
LHCP
Horiz. position of the logo storing area. Rd/Wr
0
255
Lu
LVCP
Vert. position of the logo storing area. Rd/Wr
0
255
LW
LHSA
Horizontal size of the logo storing area. Rd/Wr
5
255 5 = 3%
255 = 100%
LS
LVSA
Vertical size of the logo storing area.
Rd/Wr
5
255 5 = 3%
255 = 100%
LH
LHPA
Horizontal position of the logo 1.
Rd/Wr
0
255
Lh
LHPB
Horizontal position of the logo 2.
Rd/Wr
0
255
LV
LVPA
Vertical position of the logo 1.
Rd/Wr
0
255
Lv
LVPB
Vertical position of the logo 2.
Rd/Wr
0
255
LP
LPXA
Pixels number in a line of the logo 1.
Rd
0 65535
LL
LLNA
Lines number in a logo 1.
Rd
0 65535
These 2 commands allow calculating the
duration of the storing.
Lp
LPXB
Pixels number in a line of the logo 2.
Rd
0 65535
Li
LLNB
Lines number in a logo 2.
Rd
0 65535
These 2 commands allow calculating the
duration of the storing.
LT
LTYA
Logo 1 type.
Rd/Wr
0
1
0 = frame 1= logo
Lt
LTYB
Logo 2 type.
Rd/Wr
0
1
0 = frame 1= logo
LO
LOFA
Output format during the logo1 storing.
Rd
0 11
Lo
LOFB
Output format during the logo2 storing.
Rd
0 11
Identical as F command.
LR LSTO
•
In recording mode: frame/logo storing.
•
In erase mode: frame/logo erasing.
Rd
0 1
1 = STORE (automatic reset).
1 = ERASE (automatic reset).
Lr
LABT
Stop the frame storing.
Rd/Wr
0
1
1 = stop the frame storing (automatic reset).
OUTPUT 1
LF
LFAD
Frame fading selection.
Rd/Wr
0
2
0 = fade color 1 = frame 1
2 = frame 2.
LE
LLEV
Luma key level.
Rd/Wr
0
255
lE LEMP
Status of the frame/logo memories.
(according to LCUR)
Rd
0 1
0 = logo/frame memorized.
1 = empty memory.
Lb LBKC
Background
color.
Rd/Wr
0
7
Ld
LLD
Fade logo duration (0.01 second step). Rd/Wr 15
255 15 = 0.15 second
255 = 2.5 seconds
Lf
LLD
Fade frame duration (0.1 second step). Rd/Wr
5
50 5 = 0.1 second
50 = 5 seconds
NOTE: To store a logo from the OUTPUT 1 display you should:
c
Select the logo recording mode with the LM command (1LM).
d
Adjust the position and size of the logo storing area with the LU, Lu, LW and LS commands.
e
Adjust the luma key level (with LE command) and the background color (with Lb command).
f
Select a logo memory with the LC command and make a store with LR command (1LR).
To store a frame from the OUTPUT 1 display you should:
c
Select the frame recording mode with the LM command (2LM), and make a store with the LR command (1LR).
NOTE:
To assign a logo/frame to an input on the OUTPUT 1 display you should:
c
Select the assignment mode with the LM command (0LM).
d
Select a stored logo/frame with LA or LB commands.
e
Adjust the horizontal & vertical position of the logo with the LH, Lh, LV & Lv commands.
