Analog way NATIX NTX8022A, User Manual

Page: 43 / 55

NATIX™ Chapter 7 : REMOTE CONTROL PROGRAMMER'S GUIDE (continued)
PAGE 43
7-4. COMMANDS AND RESPONSES TABLE
The following table resumes all of the commands that are recognized as valid and the responses that will be returned to the
control device.
VALUE ASCII
COMMAND
RESPONSE
COMMAND
DESCRIPTION
TYPE
MIN MAX DESCRIPTION
SELECTION COMMANDS
CC CH Selected input. Rd 0 8
CN CHN Input pre-selection for OUTPUT 1. Rd/Wr 0 8
cc ch Pre-selected input (read only). Rd 0 8
cn chn Input pre-selection for OUTPUT 2. Rd/Wr 0 8
0 = black
1 = input #1
2 = input #2
3 = input #3
4 = input #4
5 = input #5
6 = input #6
7 = input #7
8 = input #8
G TAKE TAKE (transition). Rd/Wr 0 1
1 = start the transition (automatic reset at the
end of the effect duration).
0 = stop the transition (for holding effect).
Z FRZ FREEZE OUT 1. Rd/Wr 0 1 0 = inactive 1 = active.
z frz FREEZE OUT 2. Rd/Wr 0 1 0 = inactive 1 = active.
INPUT COMMANDS
PC PCH Input selection for adjustment. Rd/Wr 0 8
0 = all inputs. 1 = input #1
2 = input #2.............. 8 = input #8
PE PEN Input disabling (works with PC) Rd/Wr 0 1 0 = Input disable 1 = Input enable.
PL PLD H sync load selection (works with PC). Rd/Wr 0 1 0 = Hi-Z load 1 = 75
Ω
load.
PR PRGB
RGB input type selection (works with
PC command).
Rd/Wr 0 10
0 = SDTV composite 6 = SDTV SDI.
1 = SDTV S.VIDEO 7 = computer (SOG)
2 = SDTV YUV 8 = comp (HV or C.)
3 = SDTV RGBS (TTL) 9 = comp DVI
4 = SDTV RGsB (SOG) 10 = HDTV.
5 = SDTV RGBS (ana)
PI PSTD
Input standard selection (works with
PC command).
Rd/Wr 0 4
0 = NTSC/PAL/SECAM.
1 = NTSC.
3 = SECAM
2 = PAL. 4 = Black & White.
PP PPRC VCR mode Rd/Wr 0 1 0 = OFF 1 = ON.
OUTPUT COMMANDS
FM OFTM Output formats selection ( M ). Rd/Wr 0 20
fp oftp Output formats selection ( P ). Rd/Wr 0 20
0 = SVGA 50Hz 11 = SXGA 75Hz
1 = SVGA 60Hz 12 = SXGA+ 50Hz
2 = SVGA 72Hz 13 = SXGA+ 60Hz
3 = SVGA 75Hz 14 = SXGA+ 72Hz
4 = XGA 50Hz 15 = SXGA+ 75Hz
5 = XGA 60Hz 16 = D-ILA 4/3 75Hz
6 = XGA 72Hz 17 = D-ILA 16/9 75 Hz
7 = XGA 75Hz 18 = WVGA 16/9 60Hz
8 = SXGA 50Hz 19 = HDTV 720p 50Hz
9 = SXGA 60Hz 20 = HDTV 720p 60Hz
10 = SXGA 72Hz
FY OSYN Output sync selection ( M ). Rd/Wr 0 2
fy osyn Output sync selection ( P ). Rd/Wr 0 2
0 = H &V sync. 2 = SOG
1 = Composite sync.
FS SCRM Type of screen selection ( M ) Rd/Wr 0 1 0 = 4/3 screen 1 = 16/9 screen
fs scrp Type of screen selection ( P ) Rd/Wr 0 1 0 = 4/3 screen 1 = 16/9 screen
pm PAT Test pattern selection ( M ). Rd/Wr 0 6
pp pat Test pattern selection ( P ). Rd/Wr 0 6
0 = no pattern 1 = centering 2 = color
3 = grey scale 4 = grid.
5 = softedge
6 = multi-burst.
XR REFR Output 1 rate selection. Rd/Wr 0 8
xr refr Output 2 rate selection. Rd/Wr 0 8
0 = internal rate 1 = follow input #1
2 = follow input #2... 8 = follow input #8
NOTE: ( M ) = output 1. Rd/Wr = Read and write command.
( P ) = output 2. Rd = Read only command.