NATIX™
Chapter 3 : OPERATING MODE (continued)
PAGE 19
3-1. OPERATING WITH THE REMOTE CONTROL SOFTWARE (continued)
3-1-3. OPERATING (continued)
•
DISPLAY DEVICES ADJUSTMENTS
For each OUTPUT:
c
Click on the Output tab and select the centering pattern.
d
Adjust directly the display device itself, using its controls, to fill the centering pattern in full screen.
Figure 17: Centering pattern.
•
IMAGE ADJUSTMENTS
For each input source connected to the device, make the following adjustments:
c
Select the source you want to adjust.
d
Click on the
Image : output 1
or
Image : output 2
tab.
e
Use the
Centering
function to automatically position the image in the
Centering
pattern
.
IMPORTANT:
For best results, display a full size bright image (no black border) to perform a centering. If
necessary, correct the adjustment with the position & size functions.
NOTE:
The centering function is only available for computer sources.
NOTE:
In case of same Input/Output resolution, the centering also achieves automatic pixel clock adjustments. It
may be useful, to improve manually the pixel
clock
and
phase
.
f
If needed, make the others adjustments, available in the
IMAGE
menu (color, brightness…).
NOTE:
To set the image adjustments to the factory settings, use the
Preset
function.
NOTE:
The adjustments are automatically stored in NON-volatile memories. The NATIX
™
is provided with 40
NON-volatile image memories. Each of these memories contains the input channel number, the input and
output format parameters and all of the image adjustments (position, size, brightness...). When the 40
memories are used, each new memorization erases the oldest record.
•
OPTIONAL VIDEO OUTPUT ADJUSTMENTS
Click on the
Video
tab, then make the following adjustment:
c
Select the output standard (
video standard
).
d
Select the video "
output rate
".
e
Select a level of anti-flicker (
flicker adjustment
), and select a zoom mode (
U/Over scan
).
•
AUDIO ADJUSTMENTS
Click on the
Audio
tab, and make for each AUDIO output the following adjustment:
c
Adjust the master volume.
d
Select the mono or stereo audio mode.
e
Select an AUDIO input (
breakaway
mode
)
or automatic (
auto follow
mode):
-
auto follow
= the audio switching follows automatically the video switching.
-
breakaway
= the selected audio input is permanently diffused.
f
For each audio input, adjust the level (
audio level
) and the balance (
audio balance
).
IMPORTANT:
If the auxiliary audio input (AUX) is used, don't forget to activate it with (
AUX input = ON
).
