background image

2

I. INTRODUCTION

Thank you for choosing us to get you moving! Congratulations on 
your new Alltrack acquisition! Because of it, Amylior has planted 
one tree on your behalf. Just like you, we feel it is important to 
GIVE BACK TO NATURE. Feel like giving back more? Register  
your Alltrack on the link or QR code below and Amylior will 
commit to 10 trees.

AMYLIOR LISTENS

We want to hear your questions or comments on this Owner's 
Manual, the safety and reliability of your power wheelchair and 
the service you receive from your authorized 

AMYLIOR

 supplier. 

Please feel free to write or call us at the address and telephone 
number below:

AMYLIOR 

CUSTOMER SERVICE DEPARTMENT 

AMYLIOR 

inc

.

3190 F.-X.-Tessier 
Vaudreuil-Dorion QC   
J7V 5V5, CANADA

T/F Phone:

 1 888 453-0311 

T/F Fax:

 1 877 501-8458

[email protected] 
[email protected]

FOR ANSWERS TO YOUR QUESTIONS

Your authorized supplier knows your power wheelchair best and 
can answer your questions on power wheelchair safety, use and 
maintenance. For future reference, fill in the following:

Authorized supplier:  ..........................................................................  

Sales Person:  ......................................................................................

Address:  ..............................................................................................

..............................................................................................................

Phone:  .................................................................................................  

Fax:.......................................................................................................

Serial #: ...............................................................................................

Date purchased: ..................................................................................

USER WARNING

 

WARNING 

Notice to users. DO NOT operate this power wheelchair without 
initially reading the Owner's Manual. If you do not understand 
some of the instructions and warnings contained in this Manual, 
please contact your authorized supplier or a qualified technician 
prior to operating your 

Alltrack

 power wheelchair. Not doing 

so, may result in damage and/or injury. 

AUTHORIZED SUPPLIER/   

TECHNICIAN WARNING

 

WARNING 

Notice to authorized suppliers and qualified technicians. DO 
NOT operate or service the power wheelchair without initially 
reading this Owner's Manual. If you do not understand some of 
the instructions and warnings contained in this Manual, please 
contact the 

AMYLIOR

 Technical Service Department prior to 

operating and/or servicing this 

Alltrack

 power wheelchair. Not 

doing so, may result in damage and/or injury.

 

WARNING 

Power wheelchairs contain electronic components which need to 
be handled according to the manufacturer's instructions. Please 
refer to the documents specific to your wheelchair. 

RELATED DOCUMENTS

Listed below are additional documents which may be referenced 
in this Owner's Manual:

•  R-Net module user information sheet
•  R-Net power module user information sheet 
•  R-Net intelligent lighting/seating module
•  R-Net input output module
•  R-Net on-board programming manual
•  R-Net OMNI technical manual 

 
 

 

https://amysystems.com/register_my_alltrack/

Summary of Contents for ALLTRACK M3





















































Reviews: