Amylior ALLTRACK M3, Owner'S Manual

Page: 31 / 52

31
FOR BRAKE RELEASE
(FIG.5)
a) To disengage levers:
Rotate both levers toward the outside (C).
b) To engage levers:
Rotate both levers toward the inside (D).
Fig.5
D
C
D
C
FREEWHEEL RELEASE LEVERS
(Fig.4)
When you need to manually push the power wheelchair, for
example in an emergency, or if batteries fail, you must disengage
the freewheel release levers*. It is recommended to have a
person assist you in this procedure.
!
WARNING
1. DO NOT disengage freewheel release levers unless power
to the wheelchair is off and on a level surface.
2. Be aware that the power wheelchair will not have braking
ability when levers are released, i.e. there is nothing
restraining the wheelchair from moving.
3. Make sure that the person pushing the power wheelchair has
full control when the freewheel levers are disengaged.
a)
To disengage levers:
Pull lever (B)* toward the back to the neutral position to
disengage levers.
b)
To engage levers:
Push lever (B)* towards the front to engage the levers and
return to the drive position.
* There is one lever for each motor on both sides of the wheelchair.
Fig.4
B
NOTE - If levers are difficult to engage or disengage, you may
have to rock the wheelchair back and forth and/or push against
the wheelchair while moving the lever.