background image

38

THE FOLLOWING PROCEDURE IS APPLICABLE  

TO ALL JOYSTCKS SHOWN:

a)  For power seating/standing operation, first push the mode 

button to access options.

b)  Once the seating/standing mode is accessed, toggle left or 

right until the light showing the desired power option turns on.

c)  Once the desired power option is selected, move the joystick 

forward or backward to activate the desired power option 
and move the joystick in the opposite direction to return to 
the neutral position. In principle, the direction of the joystick 
follows the movement of the body.

d)  When equipped with lighting option, press the light button to 

turn on or off. 

THE FOLLOWING MEMORY STORING FEATURE IS 

AVAILABLE FOR JOYSTICK IN FIG.2 AND FIG.3 ONLY:

If the memory option is installed on your power wheelchair, 
seating positions can be stored in memory. For safety reasons, 
the standing position is the only position that cannot be stored in 
memory. To access memory positions, toggle right until the screen 
shows M1/M2 or M3/M4. Move joystick forward for M1 
and M3 positions and move joystick backward for M2 and M4 
positions. More information detailed further.

POWER SEATING/STANDING ACTIVATION

SINGLE POWER ACTIVATION

The following devices are designed to activate one of the power 
seating options described previously, such as tilt, elevate, recline, 
combined legrests and center mount. Activation devices are 
located next to the joystick. 

For the purpose of consistency, 

let’s assume the wheelchair is in its neutral position  

to start

.

1.  SINGLE TOGGLE SWITCH

 
 

To activate the power option, toggle backward and hold 
until the desired position is achieved, then release. To return 
toward the neutral position, toggle forward. 

POWER OPTIONS OPERATION 

THROUGH THE JOYSTICK

The power tilt, seat elevate, elevate & articulating center mount, 
and standing functions can be operated using the joystick on your 
power wheelchair. The following joysticks activate multiple power 
options.

R-NET EL JOYSTICK

Mode Button

Joystick

R-NET COLOR JOYSTICK

Mode Button

Joystick

A Bluetooth module is available  

for this joystick as an add-on option.

R-NET 

ADVANCED 

JOYSTICK 

 

    

WITH 3.5” SCREEN

Mode Button
Joystick

This joystick includes a Bluetooth feature. For details on Bluetooth 
pairing and operation, please review the quick guide document 
supplied with this Owner’s Manual or refer to the PG Drives R-Net 
CJSM2 Technical Manual on our website.

Fig.1

Fig.2

Fig.3

Summary of Contents for ALLTRACK M3





















































Reviews: