AMX TDS Installation Overview
50
AMX TDS (Television Delivery System)
3.
Rename each Transmitter, so that you can identify them easily in the future.
a.
Select a Transmitter in the
Manage Unit
list.
b.
Enter a new name for the selected Transmitter in the
Unit Name
text field.
c.
Click
Update
.
4.
Scan for channels on the tuner in each Transmitter:
a.
Select
Tuner A Setup
to access the
Tuner A Setup
page.
b.
Select the
Tuner Type
(see page 56).
c.
Click
Scan
. The scan process can take several minutes to complete, depending on the number of
frequencies, and number of channels per frequency being scanned. The following page is displayed
during the scan process (FIG. 70):
d.
Click
Refresh
.
If the scan is not yet complete, Refresh simply returns you to the Scanning In Progress page.
When the scan is compete, Refresh to view the results of the scan, in the form of a listing of
Channels found on the scanned frequency.
5.
Select the channels that you want to enable.
You can manually enable up to five channels from the same transport stream.
Select
Full Stream
to enable all channels from a transport stream.
After booting up a Tx (or Rx), it must first be allocated an IP address (if DHCP
enabled) before appearing in the device list. Depending on the Network, this may
take a couple of minutes.
The Tuner B Setup option on this page is not used.
FIG. 70
Manage Transmitters - Channel Scan In Progress
Summary of Contents for TDS
Page 8: ...vi AMX TDS Television Delivery System Table of Contents ...
Page 86: ...Digital TV Configuration Manager 78 AMX TDS Television Delivery System ...
Page 90: ...Serial Commands 82 AMX TDS Television Delivery System ...
Page 105: ...FAQs and Recommendations 97 AMX TDS Television Delivery System ...