NetLinx Modules
76
RMS NetLinx Programmer’s Guide
Channels
The module watches for these channels on the vdvVCRModule device.
9 - Toggle System Power State
27 - Set system power to ON
28 - Set system power to OFF
254 - Power failure.
255 - Power Status.
The module watches for these channels on the dvVCR device.
241 - Set transport state to play.
242 - Set transport state to stop.
243 - Set transport state to pause.
244 - Set transport state to fast forward.
245 - Set transport state to rewind.
246 - Set transport state to search forward.
247 - Set transport state to search reverse.
248 - Set transport state to record.
Module Definition
DEFINE_MODULE 'RMSTransportMod' mdlVCR1(vdvVCRModule,
dvVCR,
vdvRMSEngine)
Where mdlVCR1is a unique module name.
vdvVCRModule
A virtual device for communicating to RMSTransportMod. This can be
the same virtual device used to communicate with an InConcert
module or the physical device. If using a SYSTEM_CALL for this
device, pass the physical device to this parameter.
dvVCR
A physical device or socket device to which the transport device is
connected.
vdvRMSEngine
A virtual device for communicating to RMSEngineMod module.
Summary of Contents for RMS 3.0
