![background image](http://html1.mh-extra.com/html/amx/rms-3-0/rms-3-0_manual_2938987051.webp)
Custom Device Monitoring Programming
43
RMS NetLinx Programmer’s Guide
Monitoring Many NetLinx-connected Devices
RMSNLDeviceMod
This module monitors one or more NetLinx-connected devices. For each device,
the module will register and monitor the online/offline status. This module
provides a very simple way to monitor NetLinx-connected devices. However, it
does not allow the naming of these devices. All devices registered with this
module will display their device definition for their name, for example 128:1:0,
and the manufacturer and model will be determined by the device. This module is
most useful for monitoring a large quantity of NetLinx devices where the logical
name of the device is not important, such as a bank of Input or Relay cards.
To use this module, create a device array with the NetLinx connected devices you
want monitored. Then pass this device array to the module:
DEFINE_DEVICE
dvDev1 = 5002:1:0
dvDev2 = 5002:2:0
dvDev3 = 5002:3:0
dvRMSEngine = 33001:1:0
DEFINE_VARIABLE
// RMS NetLinx Device to Monitor
VOLATILE DEV dvMonitoredDevices[]= { dvDev1, dvDev2, dvDev3 }
FIG. 7
Architecture of The RMSSrcUsageMod Module
Summary of Contents for RMS 3.0
