![background image](http://html1.mh-extra.com/html/amx/rms-3-0/rms-3-0_manual_2938987014.webp)
Concepts
6
RMS NetLinx Programmer’s Guide
and each NetLinx system. In the RMS server, this is accomplished through the
Configuration Wizard. In NetLinx, this is accomplished through the 'SERVER-'
command in NetLinx programming.
If using the ServerInfo.txt file, append a ":" and the port number to the server IP
address or host name.
MeetingManager 1.0 used port 9090 for communications. If you are upgrading
from MeetingManager 1.0, you may wish to continue to use port 9090. During
the upgrade process, you are prompted to change to port 3839 or continue to use
port 9090. If you change to port 3839, you need to upgrade all NetLinx systems
to use the modules from the RMS 2.0 SDK. You can use port 9090 with both
MeetingManager 1.0 and 2.0 NetLinx systems.
Once a NetLinx system has been programmed with the RMS modules and the
server's IP address or HostName, the NetLinx system automatically connects to
the RMS server.
Install Checklist
Is the RMS server's host name registered with your DNS server?
Yes
• Configure each NetLinx system to point the correct DNS server and supply the
HostName to the NetLinx programmer to use in the 'SERVER-' command. The
DNS server configuration will be picked up automatically through DHCP if the
DNS servers are registered with the DHCP server.
No
• Determine the IP address of the RMS server and supply this to the NetLinx
programmer to use in the 'SERVER-' command.
Do you want to use 3839 as the TCP/IP port for communications between Netlinx
and the RMS server?
Yes
• No changes need to be made in either the RMS server or NetLinx.
No
• Configure the TCP/IP in the RMS server using the Configuration Wizard and
supply the new port to the NetLinx programmer to use in the 'SERVER-'
command.
Summary of Contents for RMS 3.0
