AMX NCITE-813 Instruction Manual Download Page 84

Page: 84 / 140

FIG. 87

Modules - Bindings

WebConsole - Modules Options

Modules - Bindings

Click

Bindings

to access the

Device Bindings

page (FIG. 87). Use the options on this page to configure application-de-

fined Duet virtual devices with discovered physical devices.

The table on this page displays a list of all application-defined devices, including each device’s “Friendly Name”, the Duet virtual

device’s D:P:S assignment, the associated Duet Device SDK class (indicating the type of the device), and the physical device’s D:P:S

assignment. This information has to be pre-coded into the NetLinx file currently on the Master.

Instruction Manual - Incite Digital Video Presentation Systems

Summary of Contents for NCITE-813













































































































































Search results

Summary of Contents for NCITE-813

Reviews:

Related manuals for NCITE-813

Brands by name

Popular brands

AMX NCITE-813, Instruction Manual

Search results

Summary of Contents for NCITE-813

Reviews:

Related manuals for NCITE-813

Brands by name

Popular brands