115
Instruction Manual - Incite Digital Video Presentation Systems
Programming
Audio SEND_COMMANDs (Cont.)
AUDMIC_EQ_GAIN
Sets the gain on the microphone equalizer band <band> on the output audio port addressed by the
D:P:S to
<value>.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_EQ_GAIN-<band>,<value>’”
Variables:
band = 1..3 on the microphone inputs.
value = -12..12. The units are in dB.
Example:
SEND_COMMAND MIC_1,”’AUDMIC_EQ_GAIN-1,8’”
Sets the gain on microphone band #1 of microphone 1 equalizer to 8.
SEND_COMMAND MIC_2,”’AUDMIC_EQ_GAIN-3,10’”
Sets the gain on microphone band #3 of microphone 2 equalizer to 10.
?AUDMIC_EQ_Q
Requests the quality factor (Q) for the specified microphone band of the equalizer for the micro-
phone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_EQ_Q-<band>’”
Variable:
band = 1..3 on the microphone inputs.
Example:
SEND_COMMAND MIC_1,”’?AUDMIC_EQ_Q-1’”
Returns a COMMAND string of the form:
AUDMIC_EQ_Q-<band>,<value>
AUDMIC_EQ_Q
Sets the quality factor (Q) for the specified microphone band of the equalizer for the microphone
port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_EQ_Q-<band>,<factor>’”
Variables:
band = 1 to 3 on the microphone inputs.
factor = range depends on filter type (set by AUDMIC_EQ_FT)
Bell: range is 0.1 - 20.0
Band Pass:range is 0.1 - 20.0
Band Stop:range is 0.1 - 20.0
High Pass:range is 0.5 - 1.4
Low Pass:range is 0.5 - 1.4
Treble Shelf:range is 0.5 - 1.0
Bass Shelf:range is 0.5 - 1.0
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_Q-1,1’”
Sets the quality factor for the first band of the equalizer for the selected microphone port (#1
based on D:P:S) to
1.
?AUDMIC_GAIN
Requests the gain setting for the microphone.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_GAIN’”
Example:
SEND_COMMAND MICROPHONE_1, “’?AUDMIC_GAIN’”
Returns a COMMAND string of the form:
AUDMIC_GAIN-<gain>
AUDMIC_GAIN
Sets the gain of the microphone port addressed by the D:P:S to <gain>.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_GAIN-<gain>’”
Variable:
gain = -24 to 24 in dB
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_GAIN-3’”
Sets the gain for the microphone port (#1 based on the D:P:S) to 3dB.
