AMX Modero ViewPoint MVP-5100 Operation/Reference Manual Download Page 67

Page: 67 / 190

Protected Setup Pages

MVP-5100/5150 5.2" Modero Viewpoint Touch Panels

The

Protected Setup

page for the MVP-5100 is slightly different, as some of the functions are disabled

(FIG. 46). The particular functions that are disabled are explained in detail in the

Protected Setup

Navigation Buttons

section on page 57.

Rebooting and shutting down the touch panel

To reboot either the MVP-5100 or the MVP-5150:

Access the

Protected Setup

page.

Press the

Reboot

button.

Wait until the panel completes its reboot.

Log back into the

Protected Setup

page, if necessary.

To shut down the panel:

Access the

Protected Setup

page.

Press the

Shutdown

button.

Disconnect any power source plugs or USB connections, if necessary.

FIG. 46

Protected Setup page for the MVP-5100

Summary of Contents for Modero ViewPoint MVP-5100































































































































































































Search results

Summary of Contents for Modero ViewPoint MVP-5100

Reviews:

Related manuals for Modero ViewPoint MVP-5100

Brands by name

Popular brands

AMX Modero ViewPoint MVP-5100, Operation/Reference Manual

Search results

Summary of Contents for Modero ViewPoint MVP-5100

Reviews:

Related manuals for Modero ViewPoint MVP-5100

Brands by name

Popular brands