Configuring Communication
37
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
4.
In the Local Area Connection Properties window (FIG. 27) under the
General
tab, select
Internet
Protocol (TCP/IP)
and click on
Properties
to open the
Internet Protocol (TCP/IP) Properties
window. (FIG. 28)
5.
In the new window:
Select
Use the following IP Address
.
Under
IP address
, provide an IP address, ensure that it is in the same subnet as the IP address
given to the USB interface on the device. The IP address for the device can be located on the
Systems Settings
page of the
Protected Settings
menu, as shown in FIG. 29. (For more
information, refer to the
Protected Setup Pages
section on page 53.)
Under
Subnet mask
, set the subnet mask to
255.255.255.0
.
Do not enter the Gateway or DNS information.
Click on
OK
.
FIG. 28
Internet Protocol (TCP/IP) Properties
FIG. 29
IP address location on the System Settings Page
IP Address
Summary of Contents for Modero ViewPoint MVP-5100
