AMX Modero ViewPoint MVP-5100, Operation/Reference Manual

Page: 63 / 190

Setup Pages
51 MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
Power Management Page
The options on the Power Management page allow setting of power warning preferences and battery
status information, and adjustment of the display times for battery warnings (FIG. 43).
Features on this page include:
FIG. 43 Battery page
Power Management Page
Back: Saves all changes and returns to the previous page.
WiFi/Wired/USB Icon: The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is
Wireless (image of a radio antenna), Wired (image
of three networked computers), or USB (USB connection symbol).
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note : a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Power Settings: The three settings in the Power Settings section may be selected by touching
either the arrow to the left of each setting or by touching the entry itself. Each is
highlighted with a green arrow to the left when selected.
Sleep: This value determines the number of seconds or minutes that need to pass
before the panel automatically goes into Sleep Mode. Once asleep, the device
may be awakened by touching the buttons on either side of the screen or the
screen itself. Use the
Up/Down arrows to change the settings; the setting bar
will change from blue to green to display the percentage of minimum versus
maximum.
Range = 10, 15, 20, 25, 30 seconds; 5, 15, 30 minutes; 1, 2 hours Default = 2
hours
Stand By: This value determines the number of seconds or minutes that need to pass
before the panel automatically goes into Standby Mode. Once in standby, the
device may be awakened by touching the screen. Use the
Up/Down arrows to
change the settings; the setting bar will change from blue to yellow to display
the percentage of minimum versus maximum. A value of Off disables this
feature.
Range = 15, 30 minutes; 1, 2, 3, 4 hours Default = Off