manualshive.com logo in svg

AMX modero NXD-CV10, Operation/Reference Manual

The AMX Modero NXD-CV10 offers a user-friendly interface for seamless control in your smart home or office environment. To quickly grasp the functionalities and get started effortlessly, don't forget to download the free Quick Start Manual from manualshive.com. Experience ultimate convenience and navigate your way to a connected future.

Share
Download
background image

CV10 Touch Panel Accessories

30

 10" Modero Touch Panels

NXT-CHG Battery Charger Kit (FG2255-50K)

The NXT-CHG Kit includes one charger and two NXT-BP batteries. The optional NXT-CHG Modero Power 
Station (FIG. 32) is a two-slot, stand-alone battery charger that can be used to recharge up to two NXT-BP 
batteries. The batteries are charged in the order they are inserted into the charger. The NXT-CHG Slot 1 has the 
feature of being able to completely discharge and recharge (

recalibrate

) a battery.     

The batteries are charged in the order they are inserted into the NXT-CHG. SLOT 1 of the NXT-CHG has the 
ability to completely discharge and recharge (

recalibrate

) a battery. 

Powering the NXT-CHG

The NXT-CHG Smart Battery Charger uses an included power supply to charge inserted batteries. 

1.

Connect the rear of the NXT-CHG to the power adapter.

2.

Connect the power adapter to the provided power cord (

with plug

).

3.

Provide power to the unit by connecting the power cord (

with plug

) into a power outlet that meets the 

requirements outlined in the 

Specifications

 section for the NXT-CHG.

FIG. 32  

NXT-CHG Kit (consists of one NXT-CHG charger and two NXT-BP batteries) 

NXT-BP and NXT-CHG Specifications

Dimensions (HWD):

• 1.13" x 8.63" x 11.81" (2.86 cm x 21.91 cm x 30.00 cm)

Power Requirements:

• NXT-BP Battery Voltage - 11.1 Volts

• NXT-CHG: 90 - 264 VAC, 47-63 Hz, Single Phase 

 (using the included 24 VDC power supply)

Weight:

• 0.57 lbs (0.26 kg)

Features:

• Charge time for two depleted batteries: ~ 5 hours

• Charge Rate: 2.5 A @ 12 VDC

• 2-Bays: Sequential charging 

• LED: One LED indicator in front of each bay which conveys the status of that 

bay. Refer to the 

Reading the NXT-CHG LED Indicator

 section for more 

information.

• Recalibration pushbutton (located between the bays): Initiates recalibration 

sequence in the 

left bay only

.

• Recalibration Time: less than 9 hours

Other AMX Equipment:

• NXT-CHG Kit (

FG2250-50K

):

- 1 charger and 2 NXT-BP batteries

• NXT-BP battery pack (

FG2255-10

) (additional)

NXT-CHG Modero Power Station (charger)

NXT-BP Modero Power Pack (battery)

Battery Life indicator

Recalibration improves the reporting accuracy of the battery charge back to the 
Modero panel.

Summary of Contents for modero NXD-CV10

















































































































































































































Reviews:

No comments

Related manuals for modero NXD-CV10

Canon PowerShot SD10 Digital ELPH Software Starter Manual preview
PowerShot SD10 Digital ELPH
Brand: Canon Pages: 124
Samsung 4116 - SCX B/W Laser Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 14
Samsung 2252W - Printer - B/W Manual preview
2252W - Printer - B/W
Brand: Samsung Pages: 10
Cabletron Systems SmartSwitch 1800 User Manual preview
SmartSwitch 1800
Brand: Cabletron Systems Pages: 48
Davis Instruments GroWeatherLink User Manual preview
GroWeatherLink
Brand: Davis Instruments Pages: 108
Adobe 65007312 - Photoshop Lightroom User Manual preview
65007312 - Photoshop Lightroom
Brand: Adobe Pages: 184
Casio EMULATOR FX-ES User Manual preview
EMULATOR FX-ES
Brand: Casio Pages: 18
Brady markware User Manual preview
markware
Brand: Brady Pages: 33
Lucent Technologies CentreVu User Manual preview
CentreVu
Brand: Lucent Technologies Pages: 198
Cisco Unity Express 8.0 Voice-Mail System User Manual preview
Unity Express 8.0 Voice-Mail System
Brand: Cisco Pages: 50
Cisco TELEPRESENCE MANAGEMENT SUITE PROVISIONING Troubleshooting Manual preview
TELEPRESENCE MANAGEMENT SUITE PROVISIONING
Brand: Cisco Pages: 16
Cisco Unified MeetingPlace H.323/SIP Administrator'S Manual preview
Unified MeetingPlace H.323/SIP
Brand: Cisco Pages: 54
Cisco PVDM2 24DM - Digital Modem Module User Manual preview
PVDM2 24DM - Digital Modem Module
Brand: Cisco Pages: 48
Cisco TELEPRESENCE MANAGEMENT SUITE SECURE SERVER Configuration Manual preview
TELEPRESENCE MANAGEMENT SUITE SECURE SERVER
Brand: Cisco Pages: 34
Cisco SGACL Configuration Manual preview
SGACL
Brand: Cisco Pages: 8
Cisco Unified Videoconferencing Manager Installation Manual preview
Unified Videoconferencing Manager
Brand: Cisco Pages: 22
Cisco SMART BUSINESS COMMUNICATIONS SYSTEM Feature Reference preview
SMART BUSINESS COMMUNICATIONS SYSTEM
Brand: Cisco Pages: 27
Cisco MDS 9222i - Multiservice Modular Fabric Switch Release Note preview
MDS 9222i - Multiservice Modular Fabric Switch
Brand: Cisco Pages: 40

Brands by name

Popular brands

Load more brands