AMX Modero NXD-1200VG, Operation/Reference Manual

Page: 33 / 274

TPDesign4 Program
13 TPDesign4 Touch Panel Design Software (v2.10 or higher)
Default View
In the default view (FIG. 10), it shows the current Cursor , and (for the button the mouse is over):
Location , Size , and Feedback .
Cursor : Displays the current X-Y cursor position.
Loc : Displays the X-Y location of the button that the cursor is over (relative to the upper-left
corner of the page).
Size : Displays the size of the button that the cursor is over.
FbBk : Displays the type of feedback associated with the button that the cursor is over.
Secondary View
Double-click anywhere on the status bar to view this secondary position. In the secondary view
(FIG. 11), it shows the current
XY cursor position , and (for the button the mouse is over): Cursor ,
Channel code , Address code and Level code .
Cursor : Displays the current X-Y cursor position.
Ch : Displays the Channel code (port number:channel code) associated with the button that the
cursor is over.
Add : Displays the Address code (port number:address code) associated with the button that
the cursor is over.
Lvl : Displays the Level code (port number:level code) associated with the button that the
cursor is over.
The Status Bar also indicates connection status as follows:
FIG. 10 Status Bar - default view
FIG. 11
Status Bar - secondary position
FIG. 12 Status bar icons reflect the status of the connection to the NetLinx Master
not connected
connected to a secured but unencrypted master
connected to a secured and encrypted master
connected to an unsecured master