AMX Modero NXD-1200VG Operation/Reference Manual Download Page 22

Page: 22 / 274

TPDesign4 Program

TPDesign4 Touch Panel Design Software (v2.10 or higher)

PC Requirements

Supported Panel Types

TPDesign4 (v2.10 or higher) supports the following AMX (G4) touch panel types:

• Pentium 750 MHZ processor (minimum requirement); 1.5 GHz or faster recommended.

• 75 MB of free disk space (minimum requirement); 150 MB recommended.

• 256 MB of installed memory (RAM) (minimum requirement); 512 MB recommended.

• Minimum (VGA) screen resolution of 800x600.

• Windows-compatible CD-ROM drive.

• Windows-compatible mouse (or other pointing device).

Note

: If the scroll wheel on your Microsoft® IntelliMouse® doesn’t work with TPD4, try

downloading the latest IntelliMouse drivers from Microsoft.

Supported Panel Types

• MVP-5100:

5.2" Modero ViewPoint IR Touch Panel

(New)

• MVP-5150:

5.2" Modero ViewPoint Lite Touch Panel

(New)

• MVP-5200i:

5.2" Modero ViewPoint Touch Panel with Intercom

• MVP-7500:

7.5" Modero ViewPoint Wireless Touch Panel

• MVP-8400i:

8.4" Modero ViewPoint Wireless Touch Panel with VoIP Intercom

• MVP-8400:

8.4" Modero ViewPoint Wireless Touch Panel

• NXD-CV5:

5" Modero Touch Panel

• NXD-700vi:

7" Wall/Flush Mount Touch Panel with VoIP Intercom

• NXD-500i:

5" Modero Wall/Flush Mount Touch Panel

(New)

• NXD/NXT-CV7:

7" Modero Touch Panel

• NXD-1000vi:

10" Modero Touch Panel with VoIP Intercom

• NXD/NXT-CV10:

10" Modero Touch Panel

• NXT-CV10/PB:

10" Table Top Touch Panel with Pushbuttons

• NXD/NXT-1200V:

12" Modero Video

• NXD/NXT-1200VG:

12" Modero VG Series with RGB Option

• NXD/NXT-CA12:

12" Modero Touch Panel

• NXD/NXT-CV12:

12" Modero Touch Panel with video capabilities

• NXD/NXT-1500VG:

15" Modero VG Series with RGB Option

• NXD/NXT-CA15:

15" Modero Touch Panel

• NXD/NXT-CV15:

15" Modero Touch Panel with video capabilities

• NXD/NXT-1700VG:

17" Modero VG Series with RGB Option

• NXD/NXT-CV17:

17" Modero Touch Panel with video capabilities

• NXD-PLV:

PosiTrack Video Touch Panel

• NXP-TPI/4:

NetLinx Touch Panel Interface

• TPI-PRO:

Total Presentation Interface - Pro Edition

• R4:

Mio R-4 handheld ZigBee remote controller

The prefix " NXT" indicates the table-top (tilt) model, and "NXD" indicates the Wall/Flush mount
version.

Summary of Contents for Modero NXD-1200VG



















































































































































































































































































Search results

Summary of Contents for Modero NXD-1200VG

Reviews:

Related manuals for Modero NXD-1200VG

Brands by name

Popular brands

AMX Modero NXD-1200VG, Operation/Reference Manual

Search results

Summary of Contents for Modero NXD-1200VG

Reviews:

Related manuals for Modero NXD-1200VG

Brands by name

Popular brands