Configuration and Firmware Update
62
MAX-CSE/MAX-CSD10 Operation/Reference Guide
11.
Click the
Reboot Device
checkbox to reboot the MAX unit after the firmware update process is
complete.
12.
Click
Send
to begin the transfer. The file transfer progress is indicated on the bottom-right of the
dialog (FIG. 39).
13.
Click
Close
once the download process is complete.
14.
Right-click the System number and select
Refresh System
. This establishes a new connection to the
System and populates the list with the current devices (
and their firmware versions
) on your system.
FIG. 39
Send to NetLinx Device dialog (showing MAX unit’s firmware updated via IP)
Selected MAX firmware file
Description field for selected Kit file
Device and System Number
must match the Device and System
values listed in the Workspace window
Firmware download
status
Download of the last Kit file component can take a few minutes to complete. DO NOT
terminate this upload process until all components have completely been installed
and the device reboots. During this process, the LCD will show
FW LOADING
.
If the connection fails to establish, a Connection Failed dialog appears.
Try selecting a different IP Address if communication fails.
Press the
Retry
button to reconnect using the same communication parameters.
Press the
Change
button to alter your communication parameters and repeat
steps 2 thru 12.
Summary of Contents for MAX-CSD 10
