AMX MAX-CSD 10, Operation And Reference Manual

Page: 46 / 110

MAX-CSD10 Web Interface
40 MAX-CSE/MAX-CSD10 Operation/Reference Guide
Administration Page Features (Cont.)
Feature Description
Stream Status frame: Located on the upper-right side of the browser window, this static
frame allows a user to not only Start and Stop an encoding
stream, but also view whether the MAX-CSD10 is detecting an
A/V signal.
• Since this frame is static, it appears on-screen no matter what
page is currently active. This frame can be very useful for a
remote administrator when trying to troubleshooting most
streaming issues.
Play/Stop The button at the top of the window reflects the condition of the
outgoing media content:
•
Play begins to sync-up the media signals and then stream them
out from the device.
- This play state is shown as active when both the Stop button
is displayed and the green
Streaming message is
displayed within the Status field.
- No changes can be made to both the communication
parameters and stream profiles while the unit is in this mode.
• Stop halts the outgoing media stream from the device.
- This stop state is shown as active when both the Play button
is displayed and the blue
Idle message is displayed within
the Status field.
- Changes can be made to both the communication
parameters and stream profiles while the unit is in this mode.
Status • Indicates the status of the outgoing stream.
•
Streaming indicates that the Play button has been activated
and the process of receiving a media stream has begun.
Streaming does not require that content be provided to the unit,
it is only the conversion process which has been initiated. This
is why it is important to make sure that the unit is also detecting
an incoming A/V feed.
• Idle indicates that the Stop button has been activated and the
stream process has been halted.
Refresh This button causes the unit to re-verify the condition/state of the
stream Status.
Logoff This button logs off the Decoder Manager. The user will then
have to log back in with the correct userid and password to
access the Decoder Manager.
Active Page frame: Located on the right side of the browser window, this dynamic
frame displays the pages corresponding to the currently selected
option from within the Navigation frame. The top of these pages
also provide the user with some common application buttons
such as
Apply and Refresh .
• Since this frame is dynamically populated, its contents will
depend on which Navigation link was currently selected.