MAX-CSD10 Web Interface
45
MAX-CSE/MAX-CSD10 Operation/Reference Guide
Setting up a Manual stream configuration
1.
From the
Stream Set-up
page, choose Manual from the
Run Mode
drop-down menu. (See FIG. 26.)
2.
Select between UDP and RTP in the
Transports
drop-down menu.
3.
Enter a new IP address in the
Server Address
field, if necessary.
4.
Enter a new value in the
Server Video Port
field, if necessary.
5.
Select between MPEG-2 and MPEG-4 in the
Server Video Types
drop-down menu.
6.
If you chose RTP in the
Transports
drop-down menu, enter a new port number in the
Server Audio
Port
field. If you chose UDP, this field will already be filled and disabled.
7.
Select between MP3 and AAC in the
Server Audio Types
drop-down menu.
8.
To save your changes, click the
Accept
button at the bottom of the page. To return to the previously
saved information, click
Cancel
.
FIG. 26
Stream Configuration Page - Manual Mode
Summary of Contents for MAX-CSD 10
