![background image](http://html.mh-extra.com/html/amx/max-aom/max-aom_setup-manual_2937757011.webp)
Introduction - MAX HT System Setup
5
MAX HT Four-Zone System Setup Guide
Before You Begin: Gather Required Network Information
As an IP device, there is certain information regarding the network that will be required during the MAX
Server setup.
If you are not aware of the details of the network that the MAX server will be on, contact the network
administrator to gather this information before you begin.
During the installation process, you will need to provide the following information:
IP address
- By default, all MAX servers are assigned IP Address
192.168.1.30
.
In many cases, this default address will work, but depending on the network
configuration at the installation site, it may need to be changed.
Ask the network administrator for an appropriate IP address assignment for the MAX
server.
Netmask
- The Netmask address is automatically derived from the IP address.
Default Gateway
- By default, MAX servers use a default Gateway address ending in "
.254
".
In most cases, this
will
need to be changed. Find out from your network administrator what
Gateway address would be appropriate to assign to the MAX server.
Primary Nameserver
- Again, ask the network administrator for the IP of the primary DNS
on the network.
FIG. 10
Display Devices and Audio Amplifiers or Audio Switches
Do not use DHCP with MAX servers.
Summary of Contents for MAX-AOM
