![background image](http://html.mh-extra.com/html/amx/max-aom/max-aom_setup-manual_2937757019.webp)
Step 3: Power Up The HT Server
13
MAX HT Four-Zone System Setup Guide
Step 3: Power Up The HT Server
1.
Flip the Master Power switch (located to the direct left of the Power Cable Connector) to the On
position.
2.
Push the Power On/Off toggle switch to apply power.
3.
Allow up to one minute for the server to boot-up.
While the server boots up, you should see the LEDs on the four drives on the front panel of the
HT server light up.
Also, you should be able to see the bootup sequence scrolling on the VGA monitor.
When the port status LEDs on the CONTROL switch light to show activity on the ports that
the HT server is connected to, the Server and Switch should be ready.
Once the server has booted up, the MAX Admin Menu should appear on the monitor.
Working With the MAX Admin Menu
The MAX Admin Menu allows access to various administrative functions for the MAX server. For our
purposes, we will use options in the Admin Menu to add the four MAX-AVPs and the AOM to the
server.
These devices must be added to the server via Admin Menu before they can be physically connected to
the server.
You'll Use the PS/2 Keyboard to navigate and make selections in the Admin Menu.
FIG. 18
MAX Admin Menu
Summary of Contents for MAX-AOM
