![background image](http://html.mh-extra.com/html/amx/max-aom/max-aom_setup-manual_2937757016.webp)
Step 2: Setting Up The 2 Ethernet Switches
10
MAX HT Four-Zone System Setup Guide
2.
At this point, decide which of the Ethernet Switches will be used for the CONTROL segment, and
which one will be used as the A/V segment. For clarity moving forward, you may consider labeling
each one. Again, the switch used for the A/V Segment must be a Gigabit Ethernet switch.
3.
Use a CAT5 Ethernet cable to connect any available port on the CONTROL Switch to the Internet
(FIG. 15).
4.
Use a CAT5 Ethernet cable to connect any available port on the CONTROL Switch to the
"ETHERNET CONTROL" port on the HT Server (FIG. 16).
FIG. 15
Connect Any Available Port On The CONTROL Switch To The Internet
FIG. 16
Connect Any Available Port On The CONTROL Switch To The "ETHERNET CONTROL" Port On The HT Server
Summary of Contents for MAX-AOM
