![background image](http://html.mh-extra.com/html/amx/max-aom/max-aom_setup-manual_2937757045.webp)
Testing the MAX Setup
39
MAX HT Four-Zone System Setup Guide
6.
Use the remote to select the movie title and press Play. The movie should be displayed on the
display device connected to this AVP.
Testing the AOM
To test audio output on the AOM, you'll need to use the WinMAX software application from AMX.
WinMAX allows you to control the MAX Servers via a PC residing on the CONTROL segment of the
MAX network.
The PC requirements for WinMAX are:
Windows 2000® (Service Pack 4 or greater)
Windows XP® Professional (Service Pack 1 or greater)
1.
First, download and install the most recent version of WinMAX software from the Tech Center at
www.amx.com.
Once WinMAX is installed, you are ready to establish communication between the PC and the
MAX Server:
2.
Launch WinMAX. The first time you start WinMAX, you should expect to receive an error message
indicating that you have not connected to the MAX server.
3.
Click OK to close the error message dialog, and WinMAX will launch.
By default, the application opens to the System Information tab (FIG. 73).
FIG. 72
AVP On-screen User Interface - Movie Title Browse
Summary of Contents for MAX-AOM
